The Fire-Watch 411UDAC from Fire-Lite is a compact, multifaceted, stand-alone or slave Fire Alarm Communicator designed for a variety of fire and non-fire applications. It provides four channels (inputs) that accept waterflow devices, two- and four-wire smoke detectors, pull stations, and other normally-open contact devices. The 411UDAC is a cost-effective solution for applications that require an existing (or new) Fire Alarm Control or Security Panel to transmit system status to an off-site monitoring facility for Central or Remote Station compliance. Due to its extremely flexible programming options, the 411UDAC is also ideal for use as a stand-alone unit to monitor: sprinkler systems for waterflow and supervisory conditions; processes (i.e., water level, gas detection, loss of air flow); and normally-open contact devices.

With fifteen selectable transmission formats, including Ademco Contact ID, compatibility with virtually all Digital Alarm Communicator Receivers (DACR) is ensured. Programming can be accomplished on-site with a hand-held programmer (PRO-411), or remotely utilizing an optional PK-411UD Windows®-based remote upload/download software package. The PK-411UD upload/download software also permits system interrogation and revision from a remote site.

Download 411UDAC data sheet (PDF file, 316 KB)

411UD

411 Series Slave Digital Alarm Communicator Transmitters

The Fire•Watch 411 Series from Fire•Lite are compact, multifaceted, slave Digital Alarm Communicator Transmitters (DACTs) designed for a variety of fire, security, and non-fire applications. The series consists of two models: the 411 and 411UD, providing three and four monitoring channels (inputs) respectively. These slave DACTs are a cost-effective solution for applications that require an existing (or new) Fire Alarm Control Panel to transmit system status to an off-site monitoring facility for Central or Remote Station compliance. Due to extremely flexible programming options, the 411 Series slave DACTs are also ideal for monitoring non-fire and security control panels. With fifteen selectable transmission formats, including ADEMCO Contact ID, compatibility with virtually all Digital Alarm Communicator Receivers (DACR) is ensured. Programming can be accomplished on-site with a hand-held programmer (PRO-411), or remotely (411UD only) utilizing an optional PK-411UD Windows®-based remote upload/download software package. The PK-411UD upload/download software also permits system interrogation and revision from a remote site.

Download 411 Series data sheet (PDF file, 534 KB)

UDACT-F

UDACT-F Universal Digital Alarm Communicator Transmitter

The Fire•Lite UDACT-F Universal Digital Alarm Communicator Transmitter may be used on the MicroScan-9200 and Sensiscan 2000 fire alarm control panels. The UDACT-F transmits system status to UL listed Central Station Receivers via the public switched telephone network. The UDACT-F is compact in size and may be mounted inside the host control panel or may mount externally in a separate cabinet. EIA-485 annunciator communications bus and regulated 24-volt connections are required. The UDACT-F transmits 198 points or 56 zones when connected to the MS-9200, and 56 zones when connected to the Sensiscan 2000.

Download UDACT-F data sheet (PDF file, 530 KB)